After talking on my iPhone for about 20 minutes I started getting headaches even when I used speakerphone. So I started doing my research and came across EMF phone cases.
They looked promising so I bought one to see if they really work and I noticed a difference immediately. I don’t get headaches anymore no matter how long I talk on my phone. I still use speakerphone whenever possible but more on that below.
Government Research on Cell Phone Health Effects
The research on the health effects from our government isn’t keeping up. The United States government hasn’t funded research into the health effects of radio frequencies radiation since the 1990s.
Except for one study in 2018 that found clear evidence of carcinogenicity from cellphone radiation with only 2G and 3G. There is plenty of research not funded by the government that show alarming results.
I don’t know anyone without a cell phone, they are practically a necessity and huge convenience in today’s society. Even my 86 year old Grandma relies on her cell for GPS, texting, Facebook and phone calls, while my 9 year old nephew practically lives on his phone.
According to Paw Research Center the percent of adults who didn’t own a smart phone went from 65% to only 15% in 2021. This is a huge concern if cell phones cause harmful effects.
How To Use An EMF Protection Phone Case
It’s important to know that EMF protection phone cases only have shielding material on one side (the outer flap) so you have to always use with the shielded side facing you. After you make or receive a phone call simply close the shielded flap.
Up To 90% RF Protection
From my tests I’m reducing my EMF exposure by almost 90% (not 99% more about that below) but I still don’t put it up to my ear.
I use speaker phone or my air tube headset whenever possible because the case doesn’t completely eliminate the EMF radiation coming from your phone. Also remember when carrying your phone to point the shielded side toward you.
It’s only shielded on one side to allow the signal to go through the back so you can still making and receive phone calls and texts. If you are looking to block all signals you want a Faraday bag for your cell phone instead.
- Government Research on Cell Phone Health Effects
- How To Use An EMF Protection Phone Case
- I Bought And Tested Several EMF Blocking Cases
- Top Rated EMF Phone Cases
- Best Anti Radiation Phone Cases
- 1. SafeSleeve
- 2. Defendershield EMF Radiation Case
- 3. RadiArmor Phone Sleeve
- 4. Sanxir Anti-Radiation Case
- 5. RadiArmor Anti-Radiation Case
- What Meter To Use To Test Your EMF Phone Case
- My Radio Frequency Radiation Test and Measurements
- Why Aren't My Trifield TF2 Results Accurate
- Do EMF Phone Cases Work ?
- How Much Do EMF Protection Phone Cases Cost?
- Are EMF Blocking Phone Cases A Scam?
- Cell Phones Are Necessary For Most
- Cell Phone Radiation and Why It’s Harmful
- How To Protect Yourself From Cell Radio Frequencies
- How EMF Shielding Cases Work
- What To Look For
- Wrapping It Up
I Bought And Tested Several EMF Blocking Cases
I decided to buy several cases to test and compare to see what one is the EMF phone case is the best. I will share my results and what I learned below.
Top Rated EMF Phone Cases
If you are in a hurry and just want a quick list here it is. My favorite two brands are SafeSleeve and Defendershield, I have tested and used them both with similar results. I have more information about each case below.
|EMF Phone Case
|Where To Buy
|RadiArmor Phone Sleeve
|Sanxir Anti-Radiation Case
Best Anti Radiation Phone Cases
All of the cases listed below (with the exception of the RadiArmor phone sleeve) are wallet cases with credit card slots. These cases also provide radio frequency identification (RFID) protection, which prevents credit card hacking in public spaces.
All cell phone cases except the RadiArmor sleeve have kickstand functionality. Here is my list of the best anti radiation phones cases updated for 2023.
SafeSleeve is my number one choice because their design is more sleek and better looking in my opinion.
Available for Most Phones
They have wallet cases for the iPhone, Samsung Galaxy, Google Pixel and have universal cases for other phones. Their iPhone cases come in a variety of colors while the Samsung and Google have limited options.
4 Style Options
They offers 4 different styles. Their original wallet, detachable phone, slim (only for iPhone) and an antimicrobial version (only iPhone and Universal).
- Anti Radiation front flap
- RFID blocking wallet with built in card slots
- Certified Military Grade Drop Tested
- Built in stand
The One I Use
My favorite and the one I use is the detachable version for the iPhone.
I like that its very thin and light, it comes with magnetic detachable case that is certified military grade drop tested.
The front flap has a RFID blocking wallet that holds my debit, card, points card and another side pocket for cash.
This case has a built in convertible stand which is great for watching video and things like that.
I like the removable magnetic case because it allows me to easily take my phone out for things like taking photos and video.
It great for when I’m not using the case properly to avoid the RF reflecting off the back of the case, which can double the exposure. It also allows me to put my phone on my magnetic mount in the car and office.
I rarely let my kids use my phone but sometimes I make exceptions like when they FaceTime with their grandparents so I can quickly take my phone off and put it on the table in front of them without worrying about the added radiation.
2. Defendershield EMF Radiation Case
The DefenderShield EMF radiation case is the priciest model on the list, but it is extensively lab tested and FCC certified. This company has done its research.
The manufacturer says it blocks “virtually 100% of EMF.” Priced from $62 to $69, it’s a classic example of “you get what you pay for.” You can buy this case from DefenderShield EMF radiation case (15% Off Site Wide + 25% Off 200+) or Amazon.
The picture below is the Defendershield’s Universal phone case but they also have specific cases for iPhone 6 to 15.
3. RadiArmor Phone Sleeve
This RadiArmor Phone Sleeve is a different type of protective case. It’s actually a neoprene sleeve or pouch that you slip your phone into and wear as a holster on a belt. It has a Velcro closure, and one size fits most phones.
The manufacturer says it uses a proprietary metallic fabric and blocks between 91% and 99% of EMF radiation.
4. Sanxir Anti-Radiation Case
This Sanxir Anti-Radiation Case uses double-shielded technology that blocks 98% of EMF radiation.
5. RadiArmor Anti-Radiation Case
The RadiArmor Anti-Radiation Case appears to be available only for iPhones at the time of this writing. The manufacturer says it blocks 99% of EMF radiation.
What Meter To Use To Test Your EMF Phone Case
It’s always a good idea to test the EMF protection products you buy to ensure that they are doing what they claim to do. Unfortunately there are a lot of scams and fake products out there.
You need a meter that can measure high frequency RF radiation. Don’t make the mistake of buying a meter that measure low frequency magnetic field (LFM).
In order to measure RF radiation from your cell phone you want a meter with a greater range (like the Trifield 100XE) not sensitivity (like the Trifield TF2).
Meterk Meter Test– don’t use this one, it’s give funny results like reacting to the metal of the cases because of the magnetic sensor inside the detector.
Trifield Model 100XE Test – This is a great meter to use if you have it, unfortunately it’s been discontinued. As you can see from the picture below the EMF readings are off the chart before the phone case is closed. After the case is closed you can see a significant drop.
This case is achieved about a 90% reduction. You will never get a 100% reduction because some EMF will always come out the top and side.
In order to properly test the difference between the RF radiation coming from your cell phone with and without a case you need a professional EMF meter like the HF 59B I used below. There is a great video below that explains why you can’t use cheaper meters or even the Trifield TF2.
Tenmars TM-195 Test – this meter is calibrated to be 10x more sensitive than the the Trifield 100XE mentioned above that’s too sensitive for this test so it needs to be reduced unfortunately even at the lowest sensitivity it is still 1000 times more sensitive.
Anything above 32 microwatts per centimter square doesn’t give an accurate reading. In the test below you can see that there is a huge reduction even with it being way more sensitive.
Trifield TF2 Test – This meter is calibrated to be very sensitive. With the RF setting you can measure milliwatts per meter square, the TF2 is 10 000 times more sensitive than the Trifield 100 XE. When you use the TF2 to measure cell phone radiation is reaches it’s max peak (above 20 milliwatts per squared) instantly with and without the case closed. Once you reach max peak the numbers on the meter don’t mean anything for this test because you can’t measure a reduction.
This doesn’t mean the case isn’t working, it means that the levels are too high both ways for the meter to show any reduction. You need to use a different meter to see a reduction, one that is less sensitive. This meter will measure RF radiation from cell phones but it won’t show you exactly how much because it’s too high for the meter. In order for you to see any results with this meter you would have to reduce the RF by over 99%.
My Radio Frequency Radiation Test and Measurements
HF 59B meter – I tested the level of radio frequency radiation from my cell phone while making a call with and without the protection case.
Remember “Extreme concern” range starts at 1000 uW/m2. Here are my results.
- Front of the phone – over 18 000 uW/m2
- Right side – over 14 000 uW/m2
- Left side – over 20 000 uW/m2
- Back – over 19 000 uW/m2
With EMF Case On (SafeSleeve)
- Front – 7 700 uW/m2
- Left side – over 18 800 uW/m2
- Right side – over 20 000 uW/m2
- Back – over 20 000 uW/m2
With Case On But Shield Flap Flipped To The Back (incorrect use)
- Front – over 20 000 uW/m2
The conclusion of my test is that using the case properly with the flap closed reduces the EMF significantly from the front but like all protective cases EMF will still bleed from the top, bottom and sides or you wouldn’t get a signal and be able to use your phone.
These levels are still extremely concerning so I still never hold my phone up to my ear. I use speaker phone with my phone sitting on a table in front of me or I use my favorite pair of Defendershield air tube headphones.
Why Aren’t My Trifield TF2 Results Accurate
I’ve tried to use my Trifield TF2 meter to show the before and after results of my iphone EMF cases but the problem with this is that both max out the meter.
Meaning that the radiation is too high for the meter to measure (which is scary) but this doesn’t mean there isn’t reduction it. The meter just can’t read what the reduction is. People have had the same problem with other meters too.
Do EMF Phone Cases Work ?
Yes, but do they block 99% of RF radiation? No they don’t. EMF shielding phone cases can block up to 90% RF which is still a huge reduction.
The reason they don’t block 99% is because these cases aren’t Faraday bags and only the front flap has shielding material inside so you will always get RF bleeding from the back, top and sides of your phone.
How Much Do EMF Protection Phone Cases Cost?
The price of good EMF shielding phone cases can vary anywhere from $37 to $75 USD.
I used to buy tempered glass to protect my screen for about $10 and then a phone case for about $30-$40. With my new case I don’t need the tempered glass because the wallet style protects it.
So my EMF blocking case didn’t really cost me much more and honestly I would pay more for the radiation protection and peace of mind. Chances are you are going to buy a case for your phone so you might as well buy one with EMF protection.
Are EMF Blocking Phone Cases A Scam?
Some EMF protection products out there are just pure scams but even the most reputable companies use somewhat misleading advertising. The 99% reduction they are referring to is the actual material or technology used inside the products and not the products themselves.
If you read it carefully you will see “Up to 99% of FCC lab tested shielding technology” or “FCC certified lab testing, our state of the art technology blocks virtually 100% of the full frequency spectrum of electromagnetic radiation (EMF)”.
The FCC certified labs they cite use a controlled signal generator and test raw material. They don’t test the actual product using a real phone.
So in that sense they aren’t living material could block 100% in the right situation.
Cell Phones Are Necessary For Most
For many people, cell phones are a job requirement, with the expectation that it is on you at all times. I bet that if your cell is not on you that it is within reach right now. The convenience of all that data readily available at our fingertips comes at a cost to us. One that many people still don’t realize and that has taken the rest of us a long time to figure out.
Cell phones emit a form of radiation, one that has been linked to a number of serious and chronic health problems. We still don’t know the full effect it has on us, as studies haven’t been done yet that shows the long-term effects of this constant radiation exposure.
Landlines Would Be Ideal
Now the ideal solution would be toss your cell phones and go back to landlines that is wired in, because cordless phones also emit radiation but obviously that’s not something 99% of us are willing to do. Good for you if you can do it. I certainly cannot but there are things you can do to reduce the amount of radiation you’re exposed to.
There may be a few people around who haven’t heard about the many health conditions that have been associated with electromagnetic field (EMF) radiation. The fact that you’ve made it to this page indicates that you aren’t one of them.
And you’re right to be concerned.
One of the most pervasive forms of EMF is the radiation emitted from cell phones. Nearly everyone carries one all the time these days, so radiation from cell phones is becoming a major public health concern.
Cell Phone Radiation and Why It’s Harmful
Cell phones emit radio waves (or radiofrequency radiation), which is a form of electromagnetic field radiation (EMF). According to Statista.com, there were over 300 million smartphone users in 2022 in the United States alone.
We are surrounded by cell towers and by the devices that are in constant communication with them, practically everywhere you go and our bodies absorb energy from the radiation our phones put off.
Cell phone radiation has also been associated with a growing number of concerns for human health. There is mixed research about the how cell phone radiation effects living organisms and the studies that show harm are hard to find. Why do you think that is?
How To Protect Yourself From Cell Radio Frequencies
Turning your cell phone off at night is a great idea. If you’re used to sleeping with it next to your pillow, get another alarm clock. Keeping your phone 6 feet from you bed will also cut your EMF absorption significantly.
Of course, these measures will not protect you when you are actually using your device. The best solution would be to not use a cell phone at all. But that’s no longer feasible for most of us.
To reduce your radio frequencies from the newer phones you have to turn off 5 antennas. All of these antennas are emitting even if you aren’t using them. They are WIFI, Bluetooth, Celluar Data, “find my phone” and location services which is GPS.
You can always get an EMF meter to see exactly how much your cell phone emits and what distance is the safest but remember you have to get one that can measure high .
So, what does that mean for those of us who feel we can’t live without our cell phones? It means we need to protect ourselves. The next best thing is to get an EMF-reducing cell phone case
How EMF Shielding Cases Work
The most common type of EMF-shielding cell phone case is made of a fine mesh fabric that covers the screen side of your phone. You speak and listen through this fabric, which acts as a barrier between your face and the radiation your phone emits. In well-made cases, this causes minimal to no reduction in sound quality.
The mesh also acts as a barrier for those who carry their phones in pockets or in holsters on their belts. For effective EMF reduction, be sure to keep the protective side closest to your body.
The other side has no EMF protection so the signal will come through and you can still use your phone.
What To Look For
There are a lot of trendy products out there that claim to offer EMF protection for cell phones and other electronics. Unfortunately, the average user has no way to judge how effective they are.
Look for brands that show evidence on their web sites that their products have been independently lab tested.
Wrapping It Up
Although researchers are continuing to study the harmful effects of cell phone radiation, it’s becoming increasingly clear that EMF protection makes sense.
Reducing the harmful radiation from our cell phones is one of the most effective (and easy!) things we can do to minimize the risks associated with EMF exposure.
My favorite EMF case is this one by SafeSleeve. Remember that only the outside flap offers EMF protection and you have to always be aware and make sure that’s the side that is facing your body at all times. Using the phone case wrong can increase your exposure to radio frequencies.
When it comes to EMFs (electromagnetic fields) distance is still your friend so the farther away from your body the better. I still don’t put it up to my ear instead use speakerphone and air tube headphones whenever possible.
When I’m at home I keep my phone away from the area people are in and make sure that they shielding side is facing the living area.